Mercedes-Benz Conecto Manual Download

Page: 205 / 268

Opening/locking

Locking/unlocking door leaves from the outside

Locking/unlocking door leaves from
the outside

Note:

All door leaves must be unlocked before
the bus is driven.

M72.00-0024-01

Turn lock (3) upwards (4) with square
key (1).

Lock indicator (2) is black. The door
leaf is locked.

M72.00-0025-01

Turn lock (3) downwards (5) with
square key (1).

Lock indicator (2) is green. The door
leaf is unlocked.

Opening/closing door 1 from the
outside

Note:

Precondition: battery voltage 24 ± 3
volts.

M72.00-0028-01

Open fuel filler flap (1).

Press pushbutton (2).

Keep pushbutton (2) pressed until
door 1 opens.

CONECTO (C628.3--)/08.2007 GB

195

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands