Mercedes-Benz CL2012, Operator'S Manual

Page: 249 / 488

=
High-beam flasher
?
Left turn signal
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow
;
or
?
.
The corresponding turn signal flashes three
times.
X
To indicate: press the combination switch
beyond the pressure point in the direction
of arrow
;
or
?
.
High-beam headlamps
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position
2 or start the engine.
X Turn the light switch to
L
.
X
Press the combination switch beyond the
pressure point in the direction of
arrow
:
.
The
K
indicator lamp in the instrument
cluster lights up.
X
To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The
K
indicator lamp in the instrument
cluster goes out.
High-beam flasher
X
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
X
Pull the combination switch in the direction
of arrow
=
.
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
R
an air bag is deployed.
R
the vehicle is slowed down severely from a
speed of over 45 mph(70 km/h) and comes
to a halt.
X
To switch on the hazard warning lamps:
press button
:
.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
X
To switch off the hazard warning
lamps: press button
:
.
The hazard warning lamps are deactivated
automatically if the vehicle returns to a speed
of over 6 mph(10 km/h) after a full
application of the brakes.
i The hazard warning lamps still operate if
the ignition is switched off.
Exterior lighting
247
Lights and windshield wipers
Z