Mercedes-Benz Bluetooth Cradle Installation And Operation Instructions Download Page 1

Accessories

Installation and Operation 

Instructions

Mercedes-Benz Bluetooth

®

 Cradle for 

Motorola K1 KRZR phone

© 2008, Daimler AG

02/08
03F065-07

1

M+P-03F-7082

1

Application
These installation instructions are valid for 
vehicles with an MHI hands-free communi-
cation system and a Mercedes-Benz-appro-
ved Motorola K1 KRZR phone with approved 
software level. Approved mobile telephones 
are listed and can be purchased on the Inter-
net at www.wireless4mb.com or call 
1-800-910-1021 to speak to a wireless tele-
phone specialist.

Parts included

(1) Mercedes-Benz Bluetooth

®

 Cradle 

for Motorola K1 KRZR phones

Note
Please contact your local Mercedes-Benz 
Center if you encounter difficulties when 
operating the Mercedes-Benz Hands-Free 
Communication System.

G

Warning

Always use approved phones with 
the Mercedes-Benz K1 Cradle. 
Operating a non-approved phone or 
radio transmitter with its own 
attached or built-in antenna while 
the engine is running can interfere 
with the vehicle’s electronic system. 
For safety reasons, the driver should 
not use the mobile phone while the 
vehicle is in motion. We encourage 
the driver to stop the vehicle in a 
safe location before answering or 
placing a call.

2

Contents

Notes
More information can be found on the 
Internet at www.wireless4mb.com or call 
1-800-910-1021 to speak to a wireless 
activation specialist.

We reserve the right to change technical 
details from those shown in the illustrations 
contained in these installation instructions.

These installation instructions also refer to 
the Vehicle Operator

s Manual, COMAND 

Operator

s Manual, and mobile telephone 

manual. Please keep them available for 
reference.

Installing the Mercedes-Benz K1 
Cradle

3

Inserting mobile telephone

4

Pairing the Motorola K1 KRZR 
phone with the Mercedes-Benz 
K1 Cradle

6

Establishing a Bluetooth

® 

con-

nection

7

Connecting the Motorola K1 
KRZR phone and Mercedes-Benz 
K1 Cradle manually

8

Disconnecting the Bluetooth

® 

connection 

9

Removing Motorola K1 KRZR 
phone

10

Detaching the Mercedes-Benz 
K1 Cradle

11

3

Installing the Mercedes-Benz K1 Cradle

1.

Insert the Mercedes-Benz K1 Cradle (1) 

into the latches on the pre-installed MHI 
contact plate (2), located in the center 
console.
To insert the Mercedes-Benz K1 Cradle (1), 
slide it upwards until it clicks into place.

2

1

M+P-03F-5601

4

Inserting mobile telephone
The Motorola K1 KRZR phone can only be 
used inside of the Mercedes-Benz K1 Cradle 
for use in hands-free mode. The Mercedes-
Benz K1 Cradle uses Bluetooth

®

 technology 

to connect with your Motorola K1 KRZR 
phone. Make sure you have established a 
Bluetooth

®

 connection before using the 

Mercedes-Benz K1 Cradle, see pairing 
procedure on 

6

.

When using the Motorola K1 KRZR phone in 
the cradle, the Motorola K1 KRZR phone will 
also be charged and connected to the vehic-
le

s external mobile antenna for improved 

reception. 

Close the flip screen of the Motorola K1 
KRZR phone before inserting it into the 
Mercedes-Benz K1 Cradle.

Note
Closing the mobile phone flip screen ends 
the call.

1.

Insert the Motorola K1 KRZR phone (3) 

into the cradle (1) as illustrated.

1

3

M+P-03F-7084

Reviews: