Mercedes-Benz BABY-SAFE plus II, Operating Instructions Manual

Page: 16 / 49

Installation in the vehicle
14
En
gl
ish (
U
SA)
Installation with the LATCH
X
1. Securing the child in the child seat; see
page 10.
X
2. Place the child seat on a suitable vehicle
seat against the direction of travel and
secure it against tipping over.
Note: The inclination of the child seat is
correct if there is a space of about two
fingers at the front between the child seat
and the seat surface of the vehicle seat.
(Arrow)
X
3. Lock carrying handle
5
in upper
position A .
X
4. Push right LATCH arm
g
onto ISOFIX
securing ring
h
until the hook of the arm
closes around the securing ring („click“).
X
5. Insert LATCH
j
in blue seat belt
guides
c
on both sides of the child seat.
Caution Do not twist the belt.
X
6. Push left LATCH arm
k
onto ISOFIX
securing ring
h
until the hook of the arm
closes around the securing ring („click“).
X
7. Push the child seat against the backrest of
the vehicle seat and pull on the loose ends of
LATCH
j
on both sides until it is taut.
X
8. Check that the child seat is installed
correctly.
X
9. If necessary, remove the child seat from
the vehicle and repeat steps 2 to 8 until
the child seat is secured correctly.
G
DANGER!
The LATCH must be pulled tight and must
not be twisted. If the LATCH does not
secure the child seat correctly or not at all,
in the event of an accident, abrupt braking
maneuver or a sudden change in direction,
the child may otherwise not be restrained
and may be seriously or fatally injured.
16
12
18
17
16
18
12
17
19