Mercedes-Benz B-Class F-CELL, Operator'S Manual

Page: 84 / 368

:
Fuel consumption
;
Average fuel consumption
From Start
as
shown in the multifunction display of the
instrument cluster in the
Trip computer
menu
=
Generated electric power
Each bar in the chart represents the average
value for 1 minute.
Resetting values
The values are reset together when resetting
the trip computer in the
From Start
submenu (
Y
page 249).
Switching the Display On/Off
X
To switch the display off: Select
System
£
Display Off
.
The display is switched off.
X
To switch on the display: Press the
9
button, the
k
button or one of the
=
,
;
,
:
or
9
buttons.
or
X
Press the
q
button.
The system menu appears.
i You can also press one of the function
buttons, e.g. the
h
button. This turns on
the display and switches to the
corresponding function.
Time
Setting the Time
i The correct time must be set for the
following functions to operate correctly:
R
Calculation of expected time of arrival
R
Time stamps for calls received and calls
dialed
X
Press the
W
function button.
X
Select Time
£
Set Time .
or
X
Select System
£
Time
£
Set Time .
1
Sets the time
2
Current date
X
To set value: Press
:
or
9
.
X
To save setting: Press
9
.
i The increment for setting the minutes is
30 minutes due to GPS reception.
i If you change the time, previously
selected settings for time zone and
switching between summer time and
standard time are lost.(
Y
page 83).
Setting the Date/Time Format
X Select
System
£
Time
£
Format
.
The format list appears. The dots
R
in
front of the list entries indicate the current
setting.
i The abbreviations mean:
82
System Settings
COMAND
245_AKB; 1; 73, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-03T15:03:17+02:00 - Seite 82