Mercedes-Benz B-Class F-CELL, Operator'S Manual

Page: 193 / 368

R
delete a name
R
list the address book
R
delete the address book
R
open the address book
R
open an entry from the address book
R
list the phone book
R
list the destination memory
To open the address book:
X Pull the Voice Control lever toward you.
X
Give the “Address book” command.
or
X
Pull the Voice Control lever toward you.
X Give one of the address book commands
explained below.
Commands
“Address Book”
X To open the address book: Say the
command “Address book”.
“Help Address Book”
X
Using the “Help address book” command,
you can have all the essential commands
for the address book read out.
“Save Name”
Use the “Save name” command to save a
phone number with a voice tag for a specific
speaker. Use this command for a name which
is complicated or which is pronounced
differently as it is spelled, for example,
because it is a foreign name. When you have
given the command “Save Name”, voice
control prompts you to enter a phone
number.
i This function is only possible if a mobile
phone is connected to COMAND.
The digits 0 to 9 and the word “Plus” are
permitted.
“Plus” replaces the international dialing code,
e.g. “00”.
Say the phone number in the form of a
continuous string of digits or as blocks of
digits, e.g. three to five digits.
Voice control repeats the digits it recognizes
after each block of digits (with a pause of
about half a second between each block of
digits) and waits for you to continue speaking.
When you have given the command “Okay”,
voice control prompts you two or three times
to say the name. When repeating the name,
make sure that you pronounce it in exactly
the same way as you did the first time.
Otherwise, the name cannot be saved and
voice control aborts the saving procedure.
Example of dialog:
s
Save name
t
Please say the number
s
Zero one three zero
t
Zero one three zero
s
Five zero zero five
t
Five zero zero five
s
Okay
t
Please say the name.
s
Smith
t
Please repeat the name.
s
Smith
t
Do you want to save the number in a
category?
s
No
t
Name and number saved
“Dial Name”
You can use the “Dial name” command to
place a call by selecting a name from your
address book. You can choose either a voice
tag or say a name entry.
Only say the surname if only the surname is
entered in the address book.
Say the surname first and then the first name
if both are entered in the address book.
COMAND Voice Control (Address Book)
191
COMAND
245_AKB; 1; 73, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-03T15:03:17+02:00 - Seite 191
Z