Mercedes-Benz Actros 2017, Operating Instructions Manual

Page: 85 / 436

Before using the bed during a journey, make
sure you take notice of the legal requirements
for the country you are currently in. If you use
the bed while the vehicle is in motion, tighten
the safety net. Information on tightening the
safety net and on setting the head section can
be found in the "Lower bed" section
(
Y
page 78).
X To fold down: press bed
?
against the rear
wall.
X Press and hold lock
B
.
X
Unclip retainer band
A
from the wall bracket.
X
Release lock
B
.
X Swing bed
?
downwards.
X
To fold up: fully lower the head section of the
bed.
X
Fold up bed
?
and press against the rear
wall.
X Press retainer band
A
towards lock
B
and
clip it into the wall bracket.
X
Fold back the seat backrest until it engages.
Berths in an M cab
Overview
The following berths may be fitted in the M cab:
R
Standard berth, lower/padded stowage
space (
Y
page 83)
R
Lower standard berth, split (
Y
page 84)
Standard berth, lower/padded stow-
age space
G
WARNING
A vehicle occupant on the berth while the
vehicle is in motion cannot be restrained.
There is a risk of injury, possibly even fatal.
Only use the berth when the vehicle is sta-
tionary.
! Make sure that the berth does not hit the
seats when you fold it up or down. Swing or
fold the backrests of the driver's and co-driv-
er's seats forward or adjust the seats further
forward. The berth can otherwise hit the seats
and damage both components.
Berths (example: standard berth, lower)
X
Vehicles with standard lower berth: adjust or
fold the driver's and co-driver's seat backr-
ests forward.
X If necessary, move the driver's and co-driver's
seats sufficiently forward.
X
To fold down: press and hold the berth
against the rear wall.
X Turn hook
:
90° and unhook it from wall
retainer
;
.
X
Fold the berth down.
X
To fold up: fold up the berth and press and
hold it against the rear wall.
X Turn hook
:
90° and hook it into wall
retainer
;
.
Berths in an M cab
83
Driver's workstation
Z