Mercedes-Benz Actros 2017, Operating Instructions Manual

Page: 153 / 436

number of the engine oil with the lower grade
under
Engine oil grade
.
Observe the information under "Engine oils"
(
Y
page 419).
Set the oil grade of the engine oil used according
to the Sheet Numbers of the Mercedes-Benz
Specifications for Service Products under
Engine Oil grade .
i You can obtain information about service
products that have been tested by Mercedes-
Benz and approved for your vehicle on the
Internet at: http://bevo.mercedes-
benz.com/
Transmission oil grade
Set the oil grade of the transmission oil used
according to the Sheet Numbers of the
Mercedes-Benz Specifications for Service Prod-
ucts under
Transmission Oil grade
.
Rear axle oil grade
Set the oil grade of the transmission oil used
according to the Sheet Numbers of the
Mercedes-Benz Specifications for Service Prod-
ucts under
Rear axle Oil grade
.
Setting the service products
X Use the
u
or
t
button to scroll to
ä
settings.
X
Use the
r
or
s
button to scroll to the
Service products
menu window.
X Press the
9
button.
The input window displays the assembly and
the service product characteristic, for exam-
ple
Engine Oil grade
, as well as the cur-
rently set value, e.g. 228.51 .
X
To select an assembly: using the
u
or
t
button, select an assembly with a cor-
responding service product characteristic, for
example:
R
Engine Fuel grade
R
Engine Oil viscosity
R
Engine Oil grade
R
Transmission Oil grade
R
Rear axle Oil grade
X
To set the service product value: using the
r
or
s
button, select a service product
value.
X Set the service product value of the service
product added using the
u
or
t
but-
ton.
Systems menu window
Information on controlling regeneration of the
diesel particle filter can be found under:
R
Regeneration block (
Y
page 312)
R
Starting manual regeneration (
Y
page 312)
You will find information about the drive func-
tions in the automated manual transmission
under:
R
Rocking-free (
Y
page 258)
R
Crawler mode (
Y
page 257)
R
Hydromove (vehicles with a hydrodynamic
clutch)
R
EcoRoll mode (
Y
page 256)
Information on the driving systems can be found
under:
R
ATTENTION ASSIST (
Y
page 291)
R
Sideguard Assist (
Y
page 292)
R
PPC (Predictive Powertrain Control)
(
Y
page 282)
Using the Video popup function you can set
whether the image from the reversing camera is
automatically displayed if reverse gear is
engaged. You can adjust the image from the
reversing camera in the
à
driving mode menu
in the
Video
menu window (
Y
page 140).
X
Use the
u
or
t
button to scroll to
ä
settings.
X Use the
r
or
s
button to scroll to the
Systems menu window.
X
To switch the function or driving system
on/off: press the
9
button.
X Use the
r
or
s
button to select the
function or driving system.
X
Press the
u
button to activate/deacti-
vate.
If you switch the ignition lock to position 0 for
several seconds, the following vehicle systems
are automatically activated again:
R
Crawler mode
R
EcoRoll mode
R
ATTENTION ASSIST
PPC and the regeneration block of the diesel
particle filter stay on or off even after the ignition
has been switched on again.
On-board computer
151
On-board computer and displays
Z