manualshive.com logo in svg

Mercedes-Benz ACTROS 2002, Operating Instructions Manual

Share
Download
Mercedes-Benz ACTROS 2002 Operating Instructions Manual Download Page 378

373

Operation

Trailer/ semitrailer

1

2

3

4

5

6

7

8

9

 

Trailer/ semitrailer

The trailer tow hitch or semitrailer coupling 
is one of the vehicle components with par-
ticular importance for road safety. Please 
comply precisely with the manufacturer's 
operating, care and maintenance instruc-
tions. For further information, also see 
page 416.

Towing semitrailers

Before coupling (if "one-man operation" is 
possible) make sure that the semitrailer 
plate is at least 50 mm lower than the up-
per edge of the coupling plate.

Reverse and couple up the semitrailer.

After coupling up a semitrailer, lock the 
levers to prevent unauthorised opera-
tion which could lead to the coupling 
becoming detached.

Connect cables and compressed-air 
lines (

page 375).

Trailer/semitrailer coupling

Risk of accident and injury

G

Risk of trailer breaking away.

Check longitudinal play in the trailer tow 

hitch every day. To do this, move the towbar 

body of the hitch firmly forwards and back. 

Do not hold the coupling jaws. No longitudi-

nal play is permitted. If any longitudinal play 

is detected, have it eliminated at once.

Coupling up

!

Driving could cause the centre of the 
mudguard to come into contact with 
the tyres. In order to prevent damage 
during operation with a semitrailer, 
DaimlerChrysler recommends that the 
middle mudguard is removed, provided 
this is legally permitted.

Risk of accident and injury

G

Objects thrown up by the road surface could 

injure or endanger other road users. For this 

reason, make sure that the rear wheels are 

protected by mudguards when the semitrail-

er tractor vehicle is driven without a trailer.

If various semitrailers are towed, too much 

play could be present between the kingpin 

and the coupling plate. This is not permissi-

ble. Follow the manufacturer's instructions.

Summary of Contents for ACTROS 2002













































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands