background image

Important safety information

Note

There are moving components inside the engine

compartment.
Certain components can also run on or immediately

restart when the ignition is switched off, e.g.  cooler

fan.
There is a risk of injury!
If you have to perform any work in the engine

compartment,
Switch the ignition off.
Never reach into danger zone of moving component

parts, e.g.  fan rotation area.
Keep your clothing away from the moving parts.

Note

Certain components on the engine may be very hot.

There is a risk of injury when working on the engine!
Leave the engine to cool down if possible.

Before starting and stopping the engine
• Apply parking brake.
• Switch electronic ignition lock to drive position.
• Shift transmission to neutral.
• Tilt cab forward, see Chapter "Mechanical-hydraulic

cab tilt system" or "Electrohydraulic cab tilt system".

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Starting the engine and increasing the engine speed

External engine start/stop button (1)

W15.30-A001-71

• Press external engine start/stop button (1) until

engine starts.
The engine runs at idle speed.

or
• Keep external engine start/stop button (1) pressed

until engine starts and the desired engine speed is

reached.

The engine speed starts to increase after about 3

seconds. Once the external engine start/stop button

(1) is released, the engine runs at the currently set

speed.
The engine speed can be increased up to the

maximum governed rpm.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Turn off engine
• Press external engine start/stop button (1).

• Tilt back cab into drive position, see Chapter

"Mechanical-hydraulic cab tilt system" or

"Electrohydraulic cab tilt system".

Starting/stopping the engine with the cab tilted

32

Actros, Antos and Arocs | Towing and recovery

Tilting the cab

Summary of Contents for 963 2022 Series

























































































Reviews: