background image

Ignition lock
Depending on the vehicle equipment, either an

electronic ignition lock or a mechanical ignition lock may

be installed.

Switch positions of electronic ignition lock
The electronic ignition lock consists of the key slot (2) for holding the key

(3) and the two-stage start/stop button (1). To switch the electronic ignition

lock, insert the key (3) all the way into the key slot (2). Insert the key (3)

into the key slot such that the Mercedes star is facing upward.

The electronic ignition lock has the following switch positions:
• 0

Insert the key (3).
The ignition and instrument cluster display are off.

• 1 - Radio position

Power supply for some consumers.

• 2 - Drive position

The ignition is switched on. The instrument cluster display shows a

menu window or an event message.

• 3 - Start position

If the key (3) is inserted and you press the start/stop button (1) up to the

end stop, you switch the electronic ignition lock to position 3 and start

the engine.
If the key (3) is inserted and you press the start/stop button (1) up to the

1st switching threshold, you switch the electronic ignition lock to the

respective next position 01, and 2. When you press the start/stop

button (1) in position 2, you switch the electronic ignition lock back to

position 0.

Performing one of the following actions while the vehicle is stationary will

switch the engine off:
• Press the start/stop button (1) all the way down. The electronic ignition

lock is then in position 1.

• Press the start/stop button (1) as far as the 1st switching threshold and

then release it. The electronic ignition lock is then in position 1.

• Remove the key (3) from the key slot. The electronic ignition lock is then

in position 0.

Key positions in mechanical ignition lock

W15.10-A001-71

If you remove the key in position 0, the steering is locked.

0

Insert/remove key

1

Steering unlocked/radio position

2

Drive position

3

Start position

W54.25-A088-71

Instrument panel

8

Actros, Antos and Arocs | Towing and recovery

General

Summary of Contents for 963 2022 Series

























































































Reviews: