X
Shift the automatic transmission to
position
N.
X
Vehicles with manual transmission:
depress the clutch pedal.
X
Shift to neutral.
X
Release the brake pedal.
X
Release the parking brake.
X
Switch on the hazard warning flashers
(
X
Leave the SmartKey inserted in the ignition
lock in position
2.
i
When towing with the hazard warning
flashers switched on, use the combination
switch as usual to signal in which direction
you are changing. In this case, only the
indicator lamps for the direction of travel
flash. When you reset the combination
switch, the hazard warning flashers start
flashing again.
The towing eye can be used to pull the vehicle
onto a trailer or transporter for transporting
purposes.
X
Turn the SmartKey to position
2 in the
ignition lock.
X
Shift the automatic transmission to
position
N.
As soon as the vehicle has been loaded:
X
Prevent the vehicle from rolling away by
applying the parking brake.
X
Shift the automatic transmission to
position
P.
X
Turn the SmartKey to position
0 in the
ignition lock and remove the SmartKey.
X
Secure the vehicle.
!
Only lash the vehicle down by the wheels
or wheel rims, not by parts of the vehicle
such as axle or steering components.
Otherwise, the vehicle could be damaged.
Fuses
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the
components on the circuit and their functions
will fail.
Only use fuses approved by Mercedes-Benz
with the specified amperage for the system in
question and do not attempt to repair or
bridge a blown fuse. Using other than
approved fuses or using repaired or bridged
fuses may cause an overload leading to a fire,
and/or cause damage to electrical
components and/or systems. Have the cause
determined and remedied by an authorized
Mercedes-Benz Center.
Blown fuses must be replaced with fuses of
the same rating, which you can recognize by
the color and value. The fuse ratings are listed
in the fuse allocation chart. An authorized
Mercedes-Benz Center will be happy to
advise you.
i
If a fuse has blown, visit a breakdown
service or an authorized Mercedes-Benz
Center.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified
specialist workshop, e.g. an authorized
Mercedes-Benz Center.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or
systems could be damaged.
X
Park the vehicle and apply the parking
brake.
X
Switch off all electrical consumers.
X
Remove the key from the ignition lock.
Fuses
345
Roadside Assistance
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 345
Z
