your vehicle to be transported to the nearest
authorized Mercedes-Benz Center. You may
be charged for services such as repair work
and/or towing. Further details are available
in your mbrace manual.
i
If the indicator lamp in MB info call
button
:
flashes continuously and it was
not possible to establish a voice
connection to the Response Center, then
the mbrace system has failed to initiate a
Roadside Assistance call (e.g. the
corresponding cellular phone network is
not available). The
Call Failed
message
appears in the multifunction display.
X
To end a call: press the
~
button on the
multifunction steering wheel.
or
X
Press the corresponding button for ending
a phone call on COMAND.
i
Sign and Drive services
29
: you are not
charged for services such as jump-starting,
providing a few gallons of fuel for a fuel tank
that has been run dry or changing a flat tire
with the vehicle's own spare tire.
X
Press and hold MB info call button
:
for
more than two seconds.
A call to the Response Center is initiated.
MB info call button indicator lamp
:
flashes while the connection is being
established. The
Connecting Call
message appears in the multifunction
display and COMAND is muted.
If a connection can be established, the
Call
Connected
message appears in the
multifunction display.
If a mobile phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Response
Center, for example:
R
current location of the vehicle
R
vehicle identification number
R
vehicle model
R
vehicle color
i
The COMAND display shows that an
mbrace call is active. You can switch to the
navigation menu by pressing the NAVI
button on COMAND during the call. Spoken
commands are not available.
A voice connection between the Response
Center and the vehicle occupants is
established. You can obtain information on
how to operate your vehicle's systems, on the
location of the nearest authorized Mercedes-
Benz Center, and on further products and
services offered by Mercedes-Benz USA.
Further details on the mbrace system can be
found under
.
Log in under "Owners Online".
i
If the indicator lamp in MB info call
button
:
flashes continuously and no
voice connection to the Response Center
has been established, then the mbrace
system has failed to initiate an MB info call
(e.g. the corresponding mobile phone
network is not available). The
Call
Failed
message appears in the
multifunction display.
29
USA only.
30
USA only.
298
Features
Loading, stowing and features
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 298
