Display messages
Possible causes/consequences and
M
Solutions
b
Malfunction See
Operator's Manual
The exterior lighting is faulty.
X
Visit a qualified specialist workshop.
b
Auto Lamp Function
Inoperative
The light sensor is faulty.
X
Visit a qualified specialist workshop.
b
Switch Off Lights
The lights are still switched on when you leave the vehicle. A
warning tone also sounds.
X
Turn the light switch to
c
.
Adaptive Highbeam
Assist
Inoperative
Adaptive Highbeam Assist is faulty.
X
Visit a qualified specialist workshop.
Adaptive Highbeam
Assist
Currently
Unavailable See
Operator's Manual
Adaptive Highbeam Assist is deactivated and temporarily
inoperative, if:
R
the windshield is dirty in the camera's field of vision.
R
visibility is impaired due to heavy rain, snow or fog.
X
Clean the windshield.
Adaptive Highbeam Assist is available again, if:
R
the dirt (e.g. slush) drops away while the vehicle is in motion.
R
the system detects that the camera is fully operational again.
The
Adaptive Highbeam Assist Now Available
message is
displayed.
Display messages
Possible causes/consequences and
M
Solutions
+
Check Coolant
Level See
Operator's Manual
The coolant level is too low.
X
Add coolant, observing the warning notes when doing so
(
X
If coolant needs adding more often than usual, have the engine
coolant system checked at a qualified specialist workshop.
Do not spill antifreeze on hot engine parts. Antifreeze contains ethylene glycol which may burn
if it comes into contact with hot engine parts. You could be seriously burned.
246
Display messages
On-board computer and displays
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 246
