Mercedes-Benz 2011 E-Class Sedan, Operator'S Manual

Page: 228 / 400

X
Switch on COMAND and select the audio
player or medium (see the separate
operating instructions).
X Press the
=
or
;
button on the
steering wheel to select the
Audio
menu.
CD player display (example)
:
Current track
X
To select the next/previous track:
briefly press the
9
or
:
button.
X
To select a track from the track list
(rapid scrolling): press and hold the
9
or
:
button until the desired track
has been reached.
If you press and hold
9
or
:
, the rapid
scrolling speed is increased. Not all audio
players or media support this function.
If track information is stored on the audio
player or medium, the multifunction display
will show the number and name of the track.
The current track does not appear in audio
AUX mode (
Auxiliary audio mode: external
audio source connected).
Video DVD operation
X
Switch on COMAND APS and select video
DVD (see the separate operating
instructions).
X
Press the
=
or
;
button on the
steering wheel to select the
Audio
menu.
:
Current scene
X
To select the next or previous scene:
briefly press the
9
or the
:
button.
X
To select a scene from the scene list
(rapid scrolling): press and hold the
9
or
:
button until the desired
scene has been reached.
Telephone menu
Introduction
You can establish a Bluetooth
®
wireless
connection to COMAND APS (see the
separate operating instructions).
G
Warning
A driver's attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the
telephone while driving, please use the hands-
free device and only use the telephone when
weather, road and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a mobile phone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h ), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
X
Switch on the mobile phone and COMAND
APS (see the separate operating
instructions).
X
Press the
=
or
;
button on the
steering wheel to select the Tel menu.
You will see one of the following display
messages in the multifunction display:
R
Telephone Ready
or the name of the
network provider: the mobile phone has
found a network and is ready to receive.
R
No Service
: No network is available.
226
Menus and submenus
On-board computer and displays
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 226