Operating the panorama sliding
Opening and closing
Overhead control panel
:
To raise
;
To open
=
To close
The panorama roof with power tilt/sliding
panel can only be moved when the roller
sunblinds are open.
X
Turn the key to position
2 in the ignition
lock.
X
Push or pull the
3
switch in the
corresponding direction.
i
If you press the
3
switch beyond the
point of resistance, an automatic opening/
closing process is started in the
corresponding direction. You can stop
automatic operation by pressing again.
Automatic raising is only available if the
panorama roof with power tilt/sliding
panel is in the closed position.
Operating the roller sunblinds of the
General notes
The roller sunblinds provide protection from
the sun. The two roller sunblinds can only be
opened and closed together when the
panorama roof with power tilt/sliding panel
is closed.
When opening the roller sunblinds, make sure
that nobody can be injured during the opening
procedure.
The roller sunblinds are equipped with the
express operation and anti-entrapment
features. If the roller sunblinds block during
the opening procedure, the anti-entrapment
feature stops the roller sunblinds and opens
them again slightly.
The opening procedure of the roller sunblinds
can be stopped immediately by releasing the
roof switch or by operating the roof switch in
any direction if the roof switch has been
pressed beyond the point of resistance and
has been released.
Opening and closing
Overhead control panel
:
To open
;
To open
=
To close
X
Turn the key to position
2 in the ignition
lock.
X
Push or pull the
3
switch in the
corresponding direction.
i
If you press the
3
switch beyond the
point of resistance, an automatic opening/
closing process is started in the
corresponding direction. You can stop
automatic operation by pressing again.
Sliding sunroof
89
Opening and closing
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 89
Z
