X
Clean sensors
:
of the driving systems
with water, car shampoo and a soft cloth.
!
When cleaning the sensors with a power
washer, maintain a distance between the
vehicle and the nozzle of the power washer
of at least 11.8 in (30 cm). Information
about the correct distance is available from
the equipment manufacturer.
X
Use clear water and a soft cloth to clean
camera lens
:
.
!
Do not clean the camera lens and the area
around the rear view camera with a power
washer.
Cleaning the exhaust tail pipes
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
tail pipe by cleaning it regularly, especially in
winter and after washing.
!
Do not clean the exhaust tail pipes with
alkaline-based cleaning agents, such as
wheel cleaner.
X
Clean the exhaust tail pipes with a chrome
care product tested and approved by
Mercedes-Benz.
Interior care
X
Before cleaning the display, make sure that
it is switched off and has cooled down.
X
Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display cleaner.
X
Dry the display surface using a dry
microfiber cloth.
!
For cleaning, do not use any of the
following:
R
alcohol-based thinner or gasoline
R
abrasive cleaning agents
R
commercially-available household
cleaning agents
These may damage the display surface. Do
not put pressure on the display surface
when cleaning. This could lead to
irreparable damage to the display.
When cleaning the steering wheel boss and
dashboard, do not use cockpit sprays or
cleaning agents containing solvents. Cleaning
agents containing solvents cause the surface
to become porous, and as a result, plastic
Care
247
Maintenance and care
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 247
Z
