X
Switch off the lights.
X
Open the hood.
X
Turn housing cover
:
counter-clockwise
and pull it out.
X
Pull out bulb holder
;
.
X
Take the bulb out of bulb holder
;
.
X
Insert the new bulb into bulb holder
;
.
X
Insert bulb holder
;
.
X
Align housing cover
:
and turn it
clockwise until it engages.
X
Switch off the lights.
X
Open the hood.
X
Turn bulb holder
:
counter-clockwise and
pull it out.
X
Turn the bulb counter-clockwise, applying
slight pressure, and remove it from bulb
holder
:
.
X
Insert the new bulb into bulb holder
:
and
turn it clockwise while applying slight
pressure.
X
Place bulb holder
:
in the headlamp so
that retainer
=
is upright and mark
;
is
at the top.
X
Insert bulb holder
:
into the lamp and turn
it clockwise.
Changing the rear bulbs
You must open the side trim panel in the trunk
before you can change the bulbs in the tail
lamps.
Left-hand side trim panel
Right-hand side trim panel
114
Changing bulbs
Lights and windshield wipers
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 114
