Mercedes-Benz 2003 CL 500, Operator'S Manual

Page: 33 / 384

33
Getting started
Unlocking
1 KEYLESS-GO start/stop button
Before you press the KEYLESS-GO
start/stop button, the vehicle’s on-board
electronics have status
0 (as with key re-
moved).
Make sure the gear selector lever is set
to
P .
Do not depress the brake pedal.
Position 1
왘
Press the KEYLESS-GO start/stop but-
ton once.
This supplies power to some electrical
consumers, such as seat adjustment.
Ignition (or position 2)
왘
Press the KEYLESS-GO start/stop but-
ton twice in immediate succession.
This supplies power to all electrical
consumers. All the lights in the instru-
ment cluster light up.
More information can be found in the
“Controls in detail” section (
컄
page 83).
For information on starting the engine us-
ing the KEYLESS-GO start/stop button,
see “Starting with KEYLESS-GO*”
(
컄
page 43).
i
If you now press the KEYLESS-GO
start/stop button twice, the power
supply is switched off.
i
If you now press the KEYLESS-GO
start/stop button once, the power sup-
ply is again switched off.