Mercedes-Benz 2003 CL 500, Operator'S Manual

Page: 152 / 384

152
Controls in detail
Good visibility
Activating exterior rear view mirror
parking position
The buttons are located on the driver’s
door.
1 Driver’s side exterior rear view mirror
2 Passenger-side exterior rear view
mirror
Follow these steps to activate the mirror
parking position so that the passen-
ger-side exterior rear view mirror will be
turned downward to the stored position.
왘
Make sure you have stored a parking
position for the passenger-side exterior
rear view mirror (
컄
page 107).
왘
Make sure that the
MIRROR SETTING
WHEN PARKING
function in the
CONVENIENCE
submenu in the control
system, is switched to
ON
(
컄
page 142).
왘
Switch on ignition (if not already on).
왘
Press button 2 for passenger-side ex-
terior rear view mirror.
왘
Place the gear selector lever in reverse
gear
R .
The passenger-side exterior rear view
mirror will be turned downward in the
stored position.
The exterior rear view mirror returns to its
previously stored driving position:
앫
10 seconds after you put the gear se-
lector lever out of position
R
앫
immediately once you exceed a vehicle
speed of approx. 6 mph (10 km/h)
앫
immediately when you press button 1
for driver’s side exterior rear view
mirror
Electrically folding exterior rear view
mirrors
Folding the exterior rear view mirrors in
and out automatically
When the corresponding function in the
control system is activated (
컄
page 142):
앫
The exterior rear view mirrors automat-
ically fold in as soon as the vehicle is
locked from the outside.
앫
The exterior rear view mirrors automat-
ically fold out as soon as the vehicle is
unlocked and the driver’s or passenger
door are subsequently opened.