Mercedes-Benz 2003 C-Class Wagon, Operator'S Manual

Page: 230 / 370

236
Operation
Engine compartment
You can check the engine oil level on the
multifunction display.
왘
Turn the key in the starter switch to
position
2 .
The standard display (
컄
page 112) should
appear in the multifunction display.
왘
Press button
k
or
j
on the
steering wheel until the following mes-
sage is seen in the multifunction dis-
play:
ENGINE OIL LEVEL – MEASUREMENT IN
PROCESS! CORRECT MEASUREMENT ONLY
IF VEH. LEVEL
After about three seconds this mes-
sage is displayed:
ENGINE OIL LEVEL –
MEASURING NOW
One of the following messages will sub-
sequently appear in the indicator:
앫
ENGINE OIL LEVEL – OK
앫
ENGINE OIL LEVEL – ADD 1 QUART
(1.0 LITER)!
앫
ENGINE OIL LEVEL – ADD
1.5 QUARTS (1.5 LITERS)!
앫
ENGINE OIL LEVEL – ADD 2 QUARTS
(2.0 LITERS)!
Adding engine oil
1 Filler neck
왘
Unscrew the cap from filler neck 1 . Be
careful not to overfill with oil.
Be careful not to spill any oil when adding.
Avoid environmental damage caused by oil
entering the ground or water.
!
Excessive oil must be siphoned or
drained off. It could cause damage to
the engine and catalytic converter not
covered by the Mercedes-Benz Limited
Warranty.
S203 MY03_A.book Page 236 Tuesday, January 28, 2003 2:22 PM