Mercedes-Benz 2001 C 240 Operator'S Manual Download Page 108

Page: 108 / 381

Multifunction steering wheel, multifunction display

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

CD player

Radio system is switched off.

The CD player is switched on.

The number of the CD currently playing is displayed
if you are using a CD changer.

Track number.

“TITLE” appears on vehicles with COMAND system.

“TRACK” appears on vehicles with audio system.

The radio must be switched on.

The CD player must be switched on.

Press the

button repeatedly until

display (2) appears.

Press the

button repeatedly until the

required track number (4) is displayed.

Pressing the

button displays the next or

previous system.

Note:

To select a CD from the magazine, press a number on
the audio system or the (optional) COMAND system key
pad located in the center dashboard.

P54.30-3635-27

Summary of Contents for 2001 C 240






























































































































































































































































































































































































Search results

Summary of Contents for 2001 C 240

Reviews:

Brands by name

Popular brands

Mercedes-Benz 2001 C 240, Operator'S Manual

Search results

Summary of Contents for 2001 C 240

Reviews:

Brands by name

Popular brands