Initially turn the pedal slightly by hand, and then
tighten it by the wrench.
Pedals should be installed carefully by following the manual instruction.
Step 3
Install Handle Bar & Monitor & iPad Holder
Unscrew and pull the Pop Pin (7) out from the main
frame, insert the Handlebar Post (6) into the front
opening tube of the main frame. When the Handlebar
Post (6) is in the required position, install and tighten
the Pop Pin (7).
Fix the Handlebar (3) onto the Handlebar Post (6) with
four Bolts (4) & Washers (5).
Slide the Monitor (1) onto the Handlebar (3). Connect
the wire to the Monitor (1).
Cover the iPad/ Phone Holder (2) onto the Handlebar
(3) until it fits firmly.
Step 4
Install Saddle Assembly
Unscrew and pull the Pop Pin (7) out from the main
frame, insert the Saddle Post (14) into the rear
opening tube of the main frame. When the Saddle
Post (14) is in the required position, install and tighten
the Pop Pin (7).
Set the Saddle Adjustment Post (17) onto the Saddle
Post (14) and tighten it with Lock Knob (16) and
Washer (15).
Place the Saddle (18) onto the Saddle Adjustment Post
(17). Make sure that the Saddle is horizontal and
pointing straight ahead. Tighten the two nuts beneath
the Saddle (18).
After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and it functions properly.
Make sure that all parts are properly tightened before you use the exercise bike.
EN
