Configuration
PROGRAMMING MODE
In order to enter query and
programming commands via
keyboard, it is necessary
to
enter
into programming
mode. Once finished,
exit
programming mode.
•
ENTER PROGRAMMING MODE
•
Press and hold for 3 seconds
until you hear an acoustic signal.
The green status LED flashes
quickly.
•
EXIT PROGRAMMING MODE
•
Press and hold for 3 seconds
until you hear an acoustic signal. It
is essential to exit the
programming mode so that the
previously entered commands are
stored in flash memory
•
If you do not exit the programming
mode by pressing the device
exits automatically if no key is
pressed after 2 minutes, the
entered commands are saved.
3 sec
When entering the programming mode, a
password may be required in order to set
one or more parameters.
!
19
MEP2L M3.0-S1.4 EN
2020 Merak Telsis SL. All rights reserved
