Menzer VCL 530 PRO, Manual

Page: 13 / 172

English 13
Symbols on the device
Dust class
Main filter elements
Preparation
1. Unpack the device and install the accessories.
Illustration B
Initial startup
몇
WARNING
Danger from dust that is harmful to your health
Respiratory sicknesses through inhalation of dust.
Do not vacuum without correctly installed filter ele-
ments, otherwise a danger to health from increased fine
dust emission is present.
ATTENTION
Danger due to fine dust entering
Risk of damage to the suction motor.
Never remove the main filter element when vacuuming.
Anti-static system
Static charges are discharged through the earthed con-
nection nozzles. This prevents sparking and electric
shocks with electrically conducting accessories (option-
al).
Dry vacuuming
● VCL 530 PRO: The appliance is fitted with a fleece
filter bag with lock latch, order no. 37138449 (5 piec-
es).
● VCL 550 PRO: The appliance is fitted with a fleece
filter bag with lock latch, order no. 37138450 (5 piec-
es).
Note
All types of dust up to dust class L can be vacuumed
with this device.
Note
The device is an industrial vacuum cleaner for vacuum-
ing dry, non-inflammable dusts with workplace limit val-
ues (AGW) greater than or equal to 1 mg/m
3
.
● When vacuuming fine dust, a fleece filter or dust bag
(special accessory) can also be used.
Installing the fleece filter bag
1. Unlock and remove the suction head.
2. Fit the fleece filter bag.
Illustration C
3. Fit and lock the suction head.
Installing the dust bag
Note
The dust bag opening must be pulled fully over the suc-
tion hose port.
1. Unlock and remove the suction head.
2. Attach dust bag (special accessories).
Illustration D
3. Pull the dust bag (special accessories) over the con-
tainer.
4. Fit and lock the suction head.
Wet vacuum cleaning
 DANGER
Danger from dust that is harmful to your health
Respiratory sicknesses through inhalation of dust.
No dusts harmful to health may be vacuumed when per-
forming wet vacuum cleaning.
Note
The candle filter available as an accessory with the or-
der number 37138454 is not suitable for wet vacuum
cleaning.
Installing the squeegees
1. Remove the brush strips from the floor nozzle (spe-
cial accessory).
Illustration E
2. Install the squeegees.
Removing the fleece filter bag
● The fleece filter bag must always be removed when
vacuuming wet substances.
1. Unlock and remove the suction head.
2. Pull the fleece filter bag out to the rear.
Illustration F
3. Fold in the lock latch and seal the fleece filter bag
tight.
4. Dispose of the used fleece filter bag in accordance
with statutory regulations.
5. Fit and lock the suction head.
Removing the dust bag
● The dust bag (special accessories) must always be
removed when vacuuming wet substances.
1. Unlock and remove the suction head.
2. Fold up the dust bag (special accessories).
Illustration G
3. Open the dust bag (special accessory) by pulling
back the suction hose port.
4. Close the dust bag (special accessory) tightly with a
cable tie underneath the opening.
5. Take out the dust bag (special accessories).
6. Clean the container inside with a moist cloth.
7. Dispose of the dust bag (special accessory) in ac-
cordance with statutory provisions.
8. Fit and lock the suction head.
WARNING: This device contains dusts that are harmful
to your health. Emptying and maintenance, including
removal of the dust bag, may only be performed by ap-
propriately trained personnel wearing suitable personal
protective equipment. Do not switch on until the entire
filter system is installed.
Flat fold filter (PES)
Order number
37138447
Candle filter
Order number
37138454