19
MENU SYSTEM
7
FUNCTION AND OPERATION
7.1.1
CONTROLS
Appearance
Function
Description
Rotary switch
To switch on the appliance, turn the rotary
switch out of the OFF position. The power stage
can be set using the rotary switch. Turning the
switch clockwise increases the power, whilst
turning it anticlockwise reduces the power.
*Additional rotary switch position only with
SLIDE
CONTROL
hobs (turn clockwise until it
comes to a stop)
7.1.2
DISPLAY
Display indicator
Function
Description
Power stages
Power stages 1 - 8 / P9 / P10
PushHold function
Hold current temperature value
The hold function only works if the pan is
positioned at the centre of a star.
If the temperature cannot be accepted
because the temperature rise is too rapid,
the HOLD display flashes.
Temperature
Hold temperature set in °C
The hold function only works if the pan is
positioned at the centre of a star.
Residual heat
Illuminates when switched off with a pan
temperature of:
1 dash: >50°C
2 dashes: >75°C
3 dashes: >100°C
Incorrect pan material
Message when an unsuitable pan material
such as aluminium is detected
Error
An error is displayed with an “E” for error
and the error number, in this case no. 5
SLIDE
CONTROL
If the rotary knob is positioned at the
SLIDE
CONTROL
position, the display first
shows the SLC and then the power [kW]
SLIDE
CONTROL
power
consumption
The power [kW] is only displayed in
SLIDE
CONTROL
mode
