16
3.1 - RECOMMENDATIONS
The tractor must always be maneuverable.Mount enough counterweights so that
REAR tires maintain sufficient contact with the ground.
Do not ballast the front tires of the tractor.
Check tractor compatibility with harvester width (see page 24).
During operation, keep the engine speed constant from 540 to 1000 rpm according to
the machine configuration, see p.20).
Harvester wheels are used exclusively for cutting height control. Do not immerse the machine
on the ground and do not exceed the maximum cardan inclination angle (25º) during operation.
Do not turn the machine wheels against the ground. Curves and maneuvers should
always be done with the machine raised. Height adjustment can be made at the third point,
leaving the machine level or slightly tilted forward.
Please read the manufacturer's front linkage and power take-off manual carefully.
3.2 - Prohibitions
• It is forbidden to feed the machine manually.
• It is forbidden to climb on the machine turned on during transport or operation.
• It is forbidden to clean or adjust the connected machine.
• It is forbidden to alter or remove the safety shields and warnings from the machine.
• It is forbidden to perform any maintenance or repair operation on the machine with the engine.
of the connected tractor and the gimbal engaged in the tractor's PTO.
• It is forbidden to modify, even partially, any component of the machine.
• It is forbidden to use non-original spare parts.
• It is forbidden to operate the machine and tractor indoors, the carbon monoxide expelled
by the exhaust gases of the tractor is highly toxic.
• It is prohibited to use the machine for any other purpose not specified in this manual.
WARNING
The machine must be disassembled by a skilled technician who is knowledgeable of
the machine, the risks to which it is exposed and how to protect it: dismantle with the
machine safely stopped, the supports well secured and using the appropriate PPE's.
to the task (gloves, boots, glasses).The machine consists of hydraulic system and
metal frame, which must be disposed of separately and in accordance with the
national legislation of the country concerned.
DANGER
Some functional components such as feeder reels need to be partially
exposed for proper operation.
Keep people and animals at a safe distance from the feeding area of the
machine in operation.
PERMANENCE OF UNREACHED PEOPLE NEAR OPERATING MACHINE IS
PROHIBITED.
