12
5.4 Opening the device
When delivered, the front enclosure part (
2
) is not attached
with screws. The screws (
1
) are stored in the enclosed
accessory bag.
f
Ensure that the power supply is switched off.
f
Remove the upper enclosure part (
2
).
f
Remove screws (
3
) of front panel and fold down front
panel (
4
).
5.5 Installing the device
At strong minus temperatures, the device should
be initially stored for 24 hours at room tempera-
ture before installation and commissioning.
Fig.: 8. Opening the device
4
3
3
1
1
2
5.5.1 Mounting distances
The specified mounting distances are minimum distances
for unrestricted access during operation, maintenance and
repair.
5.5.2 Wall mounting
MENNEKES recommends mounting at an ergo-
nomically sensible height depending on the
height of the body.
f
Mark the mounting holes using the supplied drilling jig
(
1
) and a spirit level.
Fig.: 9. Mounting distances (mm)
300
300
300
300
Fig.: 10. Drilling jig
1
