MEN NL34, User Manual

Page: 34 / 38

Functional Description
20NL34-00 E2

2018-02-26 Page 34
3.3.2 Power over Ethernet (PoE)
Power over Ethernet startup behavior is controlled by management firmware.
Table 21. Power over Ethernet classes
3.3.3 Ethernet Status LEDs
Table 22. Ethernet status LEDs
3.3.4 Ethernet Switch
3.3.4.1 Default Configuration
Table 23. Default switch configuration
Class
Guaranteed Power
at PD Input
Guaranteed Power
at PSE Output
0 0.44 W to 12.96 W 15.4 W
1 0.44 W to 3.84 W 4.0 W
2 3.84 W to 6.49 W 7.0 W
3 6.49 W to 12.95 W 15.4 W
4 12.95 W to 25.5 W 30.0 W
A combination of different classes is also possible. See Chapter 1.3
Technical Data on page 13 for maximum output power.
See Figure 1, Front interfaces on page 11 for the position of the LEDs.
Appearance Label Color Function
L Green Indicates the link status
 On: Link up

Off: No link
 Blinking: n/a
A Yellow Indicates Ethernet activity
 On: n/a

Off: No activity
 Blinking: Transmit/Receive activity
Setting Default
Base address 192.168.0.1
Netmask 255.255.255.0
Opening of ports All ports will be opened after the system is
started.
Gateway 0.0.0.0