MEN G503, User Manual

Page: 12 / 19

Product Overview
20G503-00 E2

2017-03-06 Page 12
1.5 Technical Data
Mass Storage

Serial ATA (SATA)
- Two ports for two onboard 2.5" hard disk drives or solid state drives
- SATA revision 3.x
- Onboard SATA RAID controller supporting RAID 0, 1 and JBOD

Hot-swap support (depending on CPU board)
Front Interfaces

Power LED

Locate LED

Two activity LEDs

Hot-plug/Error LED

Eject LED

Hot-swap switch (eject button)
Onboard Interfaces

Hex switch for selection of the RAID level
Backplane Standard

Compliance with CompactPCI Serial PICMG CPCI-S.0 Specification

Peripheral slot

Host connection:
- One SATA revision 3.x uplink
- One SGPIO
Electrical Specifications

Supply voltage
- +12V (9 to 16 V), or
- +12V (5 to 16 V) (on request)

Power consumption
- Depending on HDD/SSD
Mechanical Specifications

Dimensions:
- Wide single Eurocard, 111.7 mm x 160 mm

HDD/SSD height: 9 mm max.

Weight:
- 125 g (without HDD/SSD)
See the MEN website for a detailed 3D drawing (PDF):
www.men.de/products/g503/#doc