MEN G25A, User Manual

Page: 43 / 85

Functional Description
20G025A00 E3

2017-04-20 Page 43
3.10.4 Ethernet MAC Addresses
The naming of the interfaces may differ depending on the operating system. The MAC
addresses on G25A are:
Table 13. Ethernet MAC addresses
"00 C0 3A" is the MEN vendor code. The last six digits form the unique MAC address for
each board. The serial number is added by the last three digits in the range:
Serial number 42 (X1):
0x002A = 0x802A.
The unique MAC address is set at the factory and should not be changed.
Any attempt to change this address may create node or bus contention
and thereby render the board inoperable.
Interface Position Base Address
X1 Front
0x 00 C0 3A D0 80 00
X2 Front
0x 00 C0 3A D0 90 00
X3 Front
0x 00 C0 3A D0 A0 00
Rear interface 1 Slot 2 on a standard CompactPCI
Serial backplane
0x 00 C0 3A D0 B0 00
Rear interface 2 Slot 3 on a standard CompactPCI
Serial backplane
0x 00 C0 3A D0 C0 00
Rear interface 3 Slot 4 on a standard CompactPCI
Serial backplane
0x 00 C0 3A D0 D0 00
Rear interface 4 Slot 5 on a standard CompactPCI
Serial backplane
0x 00 C0 3A D0 E0 00
See Chapter 1.6 Product Identification on page 20 .