DMU380SA Series
User’s Manual
________________________________________________________________________
Doc# 7430-0026 Rev.01
Page 15
Figure 8.
Advanced Settings
Bit Configuration
3.11
The third and final tab of the unit configuration window is “Bit Configuration”
(See
Figure 9). This tab allows the users to alter the logic of individual status flags that affect
the masterStatus flag in the master BITstatus field (available in most output packets). By
enabling individual
status flags users can determine which flags are logically OR’ed to
generate the masterStatus flag. This gives the user the flexibility to listen to certain
indications that affect their specific application. The masterFail and all error flags are not
configurable. These flags represent serious errors and should never be ignored.
