Memotec CX900e, Hardware Reference Manual, Page: 106 / 200

CX900e Hardware Reference Manual
9-12
3006M100-002
9.5 Voice SLIM LID Connector Pin Assignments
The following tables describe the signal outputs for North America and Europe
for the 6-pin RJ-12 connector and the 8-pin RJ-45 connectors.
9.6 Voice I/O Cables
The DAV I/O card connects to external devices through one of the following
separately-ordered cables:
• three meter (10 ft) straight-through cable with a male RJ-12 connector at each end
(part no. 60300049; used with FXS and FXO).
• three meter (10 ft) straight-through cable with a male RJ-45 connector at each end
(part no. 60300050; used with E&M types I through V voice interfaces).
• one-meter (40 in) octopus cable with six male RJ-45 connectors (each supporting eight
signals) at one end for connection to voice ports, and forming a single cable at the
other end with a standard 25-pair telco female connector (part no. 60300052; used to
connect to PBX punch block with E&M types I through V voice interfaces).
Table 9-4 Voice Connector Signal Output (RJ-12)
6-pin North American European
1 E E
2 T1 RxA
3 R TxB
4 T TxA
5 R1 RxB
6 M M
Table 9-5 Voice Connector Signal Output (RJ-45)
8-pin North American European
1 M M
2 E E
3 T1 RxA
4 R TxB
5 T TxA
6 R1 RxB
7 SG SG
8 SB SB