Memjet Quadient Rena MACH 6, User Manual

Page: 7 / 132

SECTION 1
GETTING ACQUAINTED
3
Print Engine View (Under Printhead Door)
1.
Service Station Sled Motor – Moves Service Station in and out from under
Printhead Assembly for inspection, cleaning or service.
2.
Ink Revolver Couplings – Connect ink hoses to Printhead Cartridge. Printhead
Latch extends and retracts couplings from Printhead.
3.
Printhead Latch – When closed connects Ink Revolver Couplings with Printhead
Cartridge. When opened, retracts Ink Revolver Couplings from Printhead Cartridge
and provides access to Printhead Cartridge for removal/replacement.
WARNING! Never attempt to open Printhead Latch manually, severe damage will
result. Use “ Release Printhead ” or “ System Deprime ” feature from Touchscreen.
4.
Printhead Cartridge – Memjet
®
Printhead produces an 8.77" (222.8 mm) wide full
color print area.
5.
Service Station – Maintains the Printhead.
The Printhead Assembly lifts and Service Station slides under Printhead to perform
Printhead maintenance and or to cap Printhead. The Service Station slides out from
under Printhead and Printhead Assembly lowers for printing and or “sled inspection”.
Contains 3 major components.
- Wiper Roller – Cleans excess ink and debris from Printhead.
- Cap – Keeps inkjet nozzles hydrated and protected when not in use.
-
Tray – Holds above components and initially captures waste ink; which is then
pumped into Waste Ink Tray
.
6.
Printhead Assembly Lifter Motor – Lifts and lowers Printhead Assembly.
During printing, Printhead Assembly is lowered.
During Printhead maintenance/cleaning or capping, Printhead Assembly lifts to allow
Service Station to slide under Printhead.
5
4
6
1
2
3