Memjet Quadient Rena MACH 6, User Manual

Page: 114 / 132

APPENDIX
110
Backup/Transfer Port
Appendix C – Backup/Transfer Port
NOTE : This port may NOT be present on all MACH 6 Printers.
The USB port, located on the front of the printer, can be used to backup stored Print Jobs. Backed-up Print Jobs can
then be transferred (uploaded) to another MACH 6 printer.
NOTE : Stored Print Jobs are jobs that have been saved to printer memory for future use. See “Stored Jobs”, for
more details on saving and using stored Print Jobs.
A technician may use this port to retrieve
all system/job/debug Log files from the
printer, so they can be archived for future
troubleshooting purposes.
Tip : Individual Job and Debug Log files
can be accessed from the printer’s
Toolbox (Service Menus).
NOTE: Backed-up Print Jobs will be
located under the \prns directory on the
USB Flash Drive. Backed-up Log files
will be located in the root directory. Log
files are in a zipped (*.tgz) format. These
files can be opened/unzipped using a zip
file utility, such as “7-Zip”.
This port is compatible with USB Flash Drives that have been formatted as “FAT32”.
CAUTION : Do NOT connect devices, other than USB Flash Drives, to this port.
When a compatible USB Flash Drive is connected to this port, you will be presented with the following
“USB Storage Device Detected” screen.
Backup Logs – Use this feature to backup all system/job/debug Log files to the USB Flash Drive.
Backup Print Jobs – Use this feature to backup all “stored jobs” to the USB Flash Drive.
Upload Print Jobs – Use this feature to transfer all “stored jobs” from the USB Flash Drive to the printer.
Quit – Tap to exit/close this menu. It is now safe to remove the USB Flash Drive.