User guide
Wireless remote control M-WRG-FBH
- 18 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L A T I O N & H E A T R E C O V E R Y
NOTICE
Hold down the
button for more than 3 seconds to activate the buzzer on the
currently selected ventilation unit. This will allow you to check that you have selected
the right ventilation unit and that it is within range.
►
Press the
button to disconnect the connection between wireless remote control
and ventilation unit.
While the connection to the ventilation unit is initialising, the ventilation unit beeps and
the LCD display on the wireless remote control shows the following information:
Fig. 15: Initialise connection set-up
The dot representing the ventilation unit and the
symbol flash.
— Once the connection has been successfully disconnected, the LCD display shows
the following information:
Fig. 16: Connection successfully disconnected
The dot representing the ventilation unit and the
symbol flash.
— If no connection could be established, the LCD display shows the following infor-
mation:
Fig. 17: Connection not successfully disconnected
The dot representing the ventilation unit flashes. The
and
symbols are
displayed.
When the
or
button is pressed or after 3 seconds, the Connection menu
