Mellanox Technologies SX6710, Hardware User Manual

Page: 48 / 112

Interfaces
Mellanox Technologies
42
4.2.1.1 System Status LED
Figure 31: System Status LEDs - Front and Rear sides
Both of the System Status LEDs (front and back) supply identical information.
It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
Table 14 - System Status LED Assignments
LED Behavior Description Action Required
Solid Green The system is up and running normally N/A
Flashing Green The system is booting up. This assignment
is valid on managed systems only. Wait up to five minutes for the end of the
booting process.
Solid Red Major Error has occurred. For example,
corrupted firmware, system is overheated
etc. If the System Status LED shows red five
minutes after starting the system, unplug the
system and call your Mellanox representa-
tive for assistance.
4.2.1.2 Fan Status LED
Figure 32: Fan Status LED - Front and Rear Sides
Both of these LEDs in the
red circles show the fans’
status.