10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
51
Mellanox Technologies
Force burn : 0
*****************************************************************
**********
Do you want to continue the install procedure ? [y/n] - Default value
y
y
Getting Software image from remote server....
6.1.2
Updating the VDM (GUI) - Gateway Version Automatic Upgrade
The Mellanox Graphic Device Manager (VDM) immediately recognizes a gateway with a
higher version (for example, when installing a new gateway in the switch, or when performing
a gateway upgrade). In such case, the VDM is automatically upgraded to the higher version.
When the GUI is closed during the upgrade, the VDM is automatically updated and no action
is required.
When the GUI is open during the upgrade, the following warning message is displayed:
Figure
6-1. Warning Message
The user must then exit the GUI and reenter it in order for the change to take effect.
6.2
Remote Management Settings (SNMP)
6.2.1
Setting Remote Management via the GUI
The Remote Management Settings dialog box enables you to set SNMP parameters to
interface with remote management systems, and to provide general details of the remote
management system.
To configure remote management settings:
Step 1
On the sRB-20210G zoom view, right-click the 10G gray area and select
Remote Management Settings
from the menu. The
Remote Management Settings
dialog
box opens, as displayed in Figure
