SN3800 Fixed Rail Kit
Kit OPN
Rack Size and Rack Depth Range
MTEF-KIT-C
430-800 mm
The following parts are included in the fixed rail kit (see figure below):
2x Rack mount rails (A)
2x Rack mount blades (B)
2x Rack mount ears (C)
8x M6 Standard cage nuts (D)
8x M6 Standard pan-head Phillips screws (E)
4x Flat Head Phillips 100 DEG 6-32X1/4" ST.ST PATCH 360 (F)
Rack Rail Kit Parts
Ax2
Bx2
Cx2
Dx8
Ex8
Fx4
Prerequisites:
Before mounting the system to the rack, select the way you wish to place the system. Pay attention to the airflow within the rack cooling, connector and
cabling options.
While planning how to place the system, consider the two installation options shown in the figures below, and review the following points:
Make sure the system air flow is compatible with your installation selection. It is important to keep the airflow within the rack in the same direction.
Note that the part of the system to which you choose to attach the rails (the front panel direction, as demonstrated in Option 1 or the FRUs
direction, as demonstrated in Option 2) will determine the system’s adjustable side. The system’s part to which the brackets are attached will be
adjacent to the cabinet.
The FRU side is extractable. Mounting the rack brackets inverted to the FRU side (Option 2) will allow you to slide the FRUs, in and out.
Short Racks (430-580 mm) Installation Options
This document is preliminary and subject to change.
Summary of Contents for MTEF-KIT-C
Page 6: ......
