Mellanox Technologies MetroX TX6240, Hardware User Manual

Page: 28 / 112

Installation Rev 1.1
Mellanox Technologies 28
Step 8.
Connect the MEX6200 unit to a second MEX6200 unit through the COM1 port, using an LR
single-mode fiber cable, as illustrated in
Figure 19.
Figure 17: MEX6200/TX6240 Connectivity
The MEX6200 does not have a power ON/OFF system, and therefore it starts operat-
ing as soon as power is applied. To control the connection of power to the MEX6200
it is recommended to use an external power ON/OFF system that disconnects all
poles simultaneously. For example, the circuit breaker used to protect the supply line
to the MEX6200 may also serve as the ON/OFF system. This type of circuit breaker
should be rated 10A.
Power should be supplied to the MEX6200 through a power cable terminated in an
appropriate plug, in accordance with the required power source.
MTX6240
MC6709309-005
MEX62-RBN
MC6709309-005
MEX6200
CH #28 CH #35