manualshive.com logo in svg

Mellanox Technologies Mellanox ConnectX MCX556M-ECAT-S25, User Manual

Share
Download
Mellanox Technologies Mellanox ConnectX MCX556M-ECAT-S25 User Manual Download Page 50

Driver Installation

Rev 1.6

48

Mellanox Technologies

 Step 7.

The firmware upgrade screen will be displayed in the following cases:

• If the user has an OEM card. In this case, the firmware will not be displayed.
• If the user has a standard Mellanox card with an older firmware version, the firmware will be 

updated accordingly. However, if the user has both an OEM card and a Mellanox card, only the 
Mellanox card will be updated.

 Step 8.

Select a Complete or Custom installation, follow Step a and on.

a. Select the desired feature to install:

• Performances tools - install the performance tools that are used to measure performance in user 

environment

• Documentation - contains the User Manual and Release Notes
• Management tools - installation tools used for management, such as mlxstat

Summary of Contents for Mellanox ConnectX MCX556M-ECAT-S25






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands