QDR InfiniBand Switch Platform User Manual
Rev 2.9
Mellanox Technologies
27
3.6.2.2
Installing the Switch in the Rack
Tools and Customer Supplied Parts
Figure 12: Rack Rail Kit Parts MIS00083/85
Make sure that the Rail kit is compatible with your rack.
For short depth switches, rail kit # MIS00083 is to be used for racks from 50cm to 80cm deep, and
rail kit # MIS00079 is to be used for racks from 38cm to 50cm deep including the iDataPlex rack.
For standard depth switches rail kit # MIS00085 is to be used for racks from 60cm to 80cm deep.
Parts included in the rail kit:
• Phillips Screwdrivers #1 and #2
• grounding screw
• ESD strap
• grounding wire sufficient to reach a valid ground.
• ESD mat
• 2 rails
• 18 recessed flat head screws
• 2 rail slides
• 8 caged nuts
• 2 brackets
• 8 pan head screws M6
Bracket
Rail slide
Rail
