ConnectX®-3 Pro Ethernet Single and Dual SFP+ Port Adapter Card User Manual
Rev 1.5
Mellanox Technologies
24
4.1.5
Uninstalling the Driver
To uninstall the mlnx_en driver run:
4.2
Windows Driver
For Windows, download and install the latest Mellanox WinOF VPI for Windows software pack-
age available via the Mellanox web site at:
http://www.mellanox.com
. Download this package
from the Mellanox web site at:
http://www.mellanox.com
=> Products => Software => Ethernet
Drivers InfiniBand/VPI Drivers => Windows SW/Driver => Download. Follow the installation
instructions included in the download package (also available from the download page).
Hardware and Software Requirements
4.2.1
Downloading MLNX_WinOF
Follow these steps to download the .exe according to your Operating System.
Step 1.
Verify the machine architecture.
1.
Open a CMD console (Click start-->Run and enter CMD).
2.
Enter the following command:
On an x64 (64-bit) machine, the output will be “AMD64”.
Step 2.
Go to the MLNX_WinOF for Windows Web page at
http://www.mellanox.com
=> Products => Software => InfiniBand/VPI Drivers => Windows
SW/Drivers.
#> /sbin/mlnx_en_uninstall.sh
Table 6 - Software and Hardware Requirements
Requirements
Description
Required Disk Space for
Installation
100 MB
Operating Systems
Windows Server 2012 (64 bit only)
Installer Privileges
The installation requires administrator privileges on the target machine.
> echo %PROCESSOR_ARCHITECTURE%
