Melitta Cafina XT8 Operating Instructions Manual Download Page 6

2�2 

Safety information

2�2�1  General

The following safety information relate to 

the machine only. In addition, there may be 

legal requirements in place for the owner/

operator, e.g., regarding food hygiene and 

safety at work.

• 

Only use the machine when you have read 

and understood these instructions in full.

• 

When operating the machine, always 

observe all information and guidelines in 

these instructions.

• 

Keep these instructions at the place of 

use of the machine.

2�2�2  Personnel

• 

This machine can be used by children 

of 8 years and above as well as persons 

with reduced physical, sensory, or mental 

capabilities if supervised or when they 

have been trained in the safe use of the 

equipment.

• 

Children under 8 years of age must be 

kept away from the machine.

• 

Children must not be permitted to play 

with the equipment. 

• 

Cleaning and user maintenance may only 

be carried out by children if they are 

properly supervised.

• 

Persons with limited experience and 

knowledge must be able to recognize 

hazards arising from incorrect operation.

• 

A user is only permitted to operate the 

machine without supervision if it has 

been explained in such a way so that the 

user knows how to operate it safely.

• 

In self-service operation, the machine 

must be supervised by trained personnel.

• 

Repairs and maintenance work may only 

be carried out by Melitta customer service 

or by specialist personnel authorized by 

the manufacturer. Incorrectly performed 

repair work can result in considerable risk 

to the user.

• 

The area reserved specifically for customer 

service is only to be accessed by persons 

who have sufficient knowledge and 

practical experience of the equipment, 

particularly with regard to safety and 

hygiene.

• 

Settings may only be made, and cleaning 

and preparation work may only be carried 

out on the machine by persons who have 

been trained by the installation engineer 

or by the manufacturer.

• 

Faulty components may only be replaced 

with original spare parts. Otherwise the 

warranty conditions will be void.

2�2�3  Correct use

• 

The machine can be damaged by pene-

trating water. The machine is not protected 

against jets of water. Protect the machine 

against water and spray water.

 

͵

Never pour water over the machine.

 

͵

Do not use any water jets, high-pres-

sure cleaners, or steam cleaners to 

clean the machine.

 

͵

The machine is not suitable for instal-

lation on a surface where a water jet 

might be used.

• 

When the machine is unattended for 

extended periods, switch it off at the main 

switch and close the water tap.

• 

Never open the covers unless explic-

itly instructed to do so. Similarly, never 

remove bolts and the housing parts that 

they hold in place. Contact with live parts 

poses a danger of death due to electrical 

voltage.

• 

Never reach into a machine opening when 

the machine is running.

Safety

6

28514  •  20170301

2

Summary of Contents for Cafina XT8









































Reviews: