Control TV.1
Thank you for choosing a Meliconi remote control.
The Control TV.1 remote control is designed to command a television.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V
AAA/LR03
alkaline batteries, not included in the
package. Insert with the correct polarity as shown in figure.
DO NOT use
rechargeable
batteries.
BATTERIES TEST:
Press and hold the
5
button and check that the LED remains on
continuously until the button is released. If the light is off or blinks, the inserted batteries are low,
therefore they need replacement.
Before using the remote control, for each device you wish to control, it is
essential
to set a
specific code
, it matched.
Identify the specific code and set it into the remote control using one of the following ways:
Use the qr-code on the side or connect to the
page and follow the instructions.
Once you have found the specific code for your device, set it in the remote control as described in the
ENTERING THE CODE DIRECTLY
chapter.
SAFETY WARNINGS
The remote control and batteries should not be exposed to excessive heat such as sunlight, fire
or the like.
The product
is not a toy
. Keep out of reach of children or domestic animals.
SMARTPHONE - TABLET - WEB
MANUAL
SEARCH
SMARTPHONE
TABLET - WEB
ACTIVATION OF REMOTE CONTROL
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
Keep this booklet for future reference
