11
• Amplified indoor aerial
• Dimensions and weight ( base) :
175 x 175 x 35 mm, 205 g
• Power supply:
Power in [C]: 5Vdc/100mA
Antenna in [A]: 5Vdc/50mA
Power unit:
IN:
100~240Vac/50-60Hz
OUT (USB):
5Vdc/1A 5W (efficiency level VI)
• Reception of digital terrestrial TV (DVB-T/DVB-T2) signals and DAB and DAB+ digital radio
signals.
• Reception range: VHF-band III (174~230 MHz) and UHF (470~694 MHz).
• Anti-interference filters for FM, 5G, 4G and GSM.
• MMIC Noise amplifier figure: 1dB
• Adjustable gain.
• Consumption: < 2 W
• Output impedance: 75 Ohm
• Temperature of use: +5~40 °C, humidity <85% (without condensation)
D
SPECIFICATIONS AND TECHNICAL DATA
The symbol of the crossed-out rubbish bin displayed on the device indicates that, at the end of its useful life, the product must be
collected separately from other waste. The user must, therefore, must take the device, at the end of its useful life, to suitable
differentiated electrical and electronic waste collection centres, or return it to the retailer when buying a new device of an equivalent type.
The appropriate differentiated collection will ensure that discarded equipment can subsequently be recycled, treated and disposed of in
an environmentally-compatible way. This will help prevent any possible negative effects on the environment and health and will facilitate
the recycling of the materials of which the device is composed.
TWO YEAR WARRANTY
- The warranty lapses if the product is tampered with or used impro-
perly. Retain the purchase receipt for any claims on the warranty.
Simplified declaration of EU conformity
The manufacturer, Meliconi SpA, declares that the "AT52 R1 amplified aerial" type of
radio equipment is in compliance with the 2014/53/EU (RED) Directive
The full text of the Declaration of EU Conformity is available at the following internet address:
www.meliconi.com/doc/at52r1
Remember that the use of an indoor aerial should always be considered to be an
"alternative" solution for the reception of television channels; nevertheless, due
to the intensity of the signals that reach the aerial inside the room, it is possible to
obtain more or less satisfactory results, depending on the conditions of use. The
best results are obtained when the aerial is positioned close to the window, in the
direction of the broadcasting station, without obstacles or buildings in between.
