Meler PS20, Instruction Manual, Page: 78 / 100

FOCKE MELER GLUING SOLUTIONS
7-2
TECHNICAL CHARACTERISTICS
Accesories
Pneumatic by-pass valve pressure control system
The equipment’s by-pass valve provides an important safety feature, as it
limits the maximum pressure in the system, especially during continuous
pumping periods with closed applicator guns.
This valve may be manually adjusted by a threaded spindle. It is possible to
add a pneumatic adjustment system, which uses a pressure regulator and a
pressure gauge display with a 1 to 13 ratio to the hydraulic pressure.
Light tower system
Four colors light tower system (red, amber, white and green) for alarm signals
of ‘alarm’, ‘low level’, ‘adhesive finished‘ and ‘unit ready’.
Dimensions
600
510
18
25
17
60
10
70
1040