Meler PS20, Instruction Manual, Page: 68 / 100

FOCKE MELER GLUING SOLUTIONS
6-4
MAINTENANCE
5. Once completely empty, clean the any remaining adhesive from around
the output hole and ramp.
6. Replace the plug.
7. Raise the discharge ramp and replace the side shroud cap.
Warning : Use appropriate protective equipment for high temperatures.
Cleaning the bottom tank
It is often necessary to clean the bottom tank to remove PUR impurities on the
walls. To do so, follow these instructions:
1. Remove the side shroud cap.
2. Remove the screws which holding the frontal panel.