manualshive.com logo in svg

Meler PS 20 NON STOP+, Instruction Manual

Share
Download
Meler PS 20 NON STOP+ Instruction Manual Download Page 62

FOCKE MELER GLUING SOLUTIONS

4-36

MELTER OPERATION

PISTÓN

HMI 

: S02001100 v1.0.106

TC  

: S02200100 v1.0.084

IO  

: S02102100 v1.0.106

6

2.2 Extra Settings

Regrind charger

Channel number

Feeder

Pattern controller

Level detector

Extermal HMI

Wireless communication

PISTÓN

HMI 

: S02001100 v1.0.106

TC  

: S02200100 v1.0.084

IO  

: S02102100 v1.0.106

START

Network Name

SSID:

0.0.0.0

IP:

Online

Wireless Communication

Channel number

Remote actuation

Remote SW update

Static Configuration

Connection Status

Wireless communication (Wi-Fi)

Optionally, the unit comes equipped with a wireless communication system to 

connect to a local network. This system connects the unit to a Meler Services 

Platform(*) with the following main functions:

•  Monitoring. 

Regularly sends the platform’s status and operating data. 

The data can be configured according to user needs.

•  Actions and Programming.  

It is possible to send specific actions or 

change the programming of a specific unit.

•  Technical support.  

The unit provides direct information on its status and 

can schedule unit maintenance or keep a log of all interventions done on 

it. 

(*) Check with the After-Sales Service or your Meler Sales Agent for more 

information about this service performance.

Connection configuration

1.  Install the ‘Espressif Esptouch’ app on a smartphone device.

2.  Connect the device to the local Wi-Fi network where you want to connect 

the melter, then run the app.

3.  On the melter’s screen, click START to start syncing. Follow the 

instructions on the app to configure the melter’s Wi-Fi access.

4.  The unit’s screen will show the connection status, the name of the Wi-Fi 

network, and the IP address automatically assigned.

You can also configure the following options from this screen:  

•  Remote control.  

Enables the unit to be able to receive actions.

•  Remote software update.

Enables the unit to be able to receive software 

updates.  

•  Static configuration.  

Enables the configuration of a static IP address for 

the melter.

PISTÓN

HMI 

: S02001100 v1.0.106

TC  

: S02200100 v1.0.084

IO  

: S02102100 v1.0.106

6

2.2 Extra Settings

Regrind charger

Channel number

Feeder

Pattern controller

Level detector

Extermal HMI

Wireless communication

Summary of Contents for PS 20 NON STOP+





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands