Meler PS 20 NON STOP+, Instruction Manual

Page: 48 / 100

FOCKE MELER GLUING SOLUTIONS
4-22
MELTER OPERATION
1.1 Heating zones
This menu lets you do the following for each zone:
• Change the name to identify it more easily.
• Edit the set point temperature.
• Edit the standby value. The value indicates the temperature reduction
with respect to its set point.
• Apply PID values. By default the unit comes configured with a Standard
PID.
You can select from four PID options: Standard, Moderate, Quick or
Manual.
Note. The PID values are directly involved in the heating
process. Do not modify these values if you do not have
the required technical knowledge or without the advice of
Meler’s After Sales Service.
HMI : S02001100 v1.0.106
TC : S02200100 v1.0.084
IO : S02102100 v1.0.106
IO : S02101100 v1.0.106
30
12
300
P:
I:
D:
-60 °C
150 °C 152 °C
PID: Standard
Standby
Temperature: Real Set Point
T: Tank
HMI : S02001100 v1.0.106
TC : S02200100 v1.0.084
IO : S02102100 v1.0.106
IO : S02101100 v1.0.106
1. Heating 1. Heating
1.1 Zones
1.3 Inhibition
1.4 Auto
Standby - OFF
1.5 Heating
Extra Settings
1.2 Sequential
B
D
A - Configuración de zonas de calentamiento.
B - Configuración de calentamiento secuencial por zonas.
C - Programación de Inhibiciones.
D - Configuración de modos de Standby.
E - Acceso a opciones extra.
‘1. Heating’ Menu
A
C
E